Analog transmitter: for detecting fluids
mipromex – the soloist
MAT 4110 analog evaluation unit
Monitors the product measurement values
The analog MAT 4110 measurement unit processes the digital measurement signal transmitted by the measurement technology. The intrinsically safe voltage supply to the measurement electronics in the connection head is provided via the signal line. A modern operating and calibration concept allows for an extremely short commissioning of the analog measurement. Measurement signal mA, percent or impulse value are displayed, as selected, on the display. An mA analog signal that corresponds to the measurement value and a relay output are available as output signals. The membrane keyboard with a functional and fully graphic display contributes toward the user friendliness and safe working.
Product measurement value monitoring
Design of the mipromex model MAT 4110
- Separation of water in petrol storage tanks
- Impedance measuring principle for tube and bar probes
- Easy calibration
- Graphic display for the lab with powerful backlighting
- Menu-guided parameterisation D / F / E
- Device data and item no. saving
- Protected parameter entry
- Measurement data processing in microprocessor technology
- One (or two, MAT 4220) measuring inputs for probe connection
- Analog output 4-20 mA with galvanised separation, max. strain 750 Ohm
- Monitored measurement circuit from the probe to the relay
- Wire breakage protection and fault monitoring in 4-20 mA mode
- Fault notification can be programmed on the analog output 0.5 - 4.0 mA / 20.0 - 22.0 mA
- Fault notification display time/date
- Open colector output with zero potential switch contact limit value
- mA output and limit value simulation
- RS232-/RS485 interface
- Mains 24 V AC/DC polarity-independent
- ATEX Ex design II (2) G [Ex ia] IIC/ [Exd ia]; CE **** EMV STS 024 CE
- 19” tray with aluminium-steel housing; IP 20 height 3 HE; width 12 TE
- Front plate: Height x width 128 x 61 mm / tray: Height x width x depth 100 x 60 x 160 mm
- Typ MAT 4110 IIC V1.1x 24V A/G, Article n°. 02.32.67.01 xxxx
Analouge messgerät mipromex MAT 4110
