center
Heading + desc
The level switch monitors all liquids in terms of their level for your application. The application-specific probe design guarantees that all products are measured reliably.
mipromex – the Level Switch
The evaluation unit monitors, detects and controls your application
Guaranteed liquid level detection in the case of products with different consistencies and electrically conductive and dielectric properties is achieved by means of dynamic measured value processing and three-dimensional measuring behaviour.
no-repeat;center top;;
auto
0 15% 0 0
center
Aquasant Grenzwert Schaumdetektion im Sterilbereich
Heading + desc
Limit Switch
Why customers rely on aquasant level switch measuring technology
- Simple commissioning
- Limit value with dynamic measured value processing
- Freely definable static limit value in the measurement range
- Detection of liquids with a wide range of consistencies
- Contamination-tolerant measuring
- Laboratory probes in the smallest designs
- Dead space-free probes
- Resistant for CIP, SIP
- Curved probes for special installation
no-repeat;center top;;
auto
30px
Measuring system
mipromex MLS
: The MLS limit value switch can be used for foam detection, fluids or powder level measuring. The first and second measurement circuits are equipped with the same functionality. The evaluation electronics not only serves as a feed unit in the 2-wire technology, it also houses the data processing intelligence.
Your benefit: High economic efficiency and investment security due to the long service life.
- Limit value on the active measurement range length can be freely parameterised
- Easy fault visualisation, fault notifications on 2nd relay output, if selected
- With 1 or 2 measuring inputs
- Limit value simulation
Ex-version: Gas II (2) G [Ex ia Gb] IIC; EMC STS 024 CE ****
Bar Probe
: The standardised bar probe is configured to customer-specific process conditions and the media used.
- Materialisation: Stainless steel, Hastelloy®, full PTFE designs
- Process connection: Flange DN, ANSI or threading
- For insulated lines with extension for detached connection head and/or with a cooling element
- for product temperatures of up to 170° C
- Connection head for indoor IP65 or outdoor IP68 in Exd
Specific bar probe
: The standardised bar probes are configured to customer-specific process conditions and the media used. The probe technology, in contrast to the capacitive system, is also suitable for insulating, low-polarity fluids.
- Materialisation: Stainless steel, Hastelloy®, full PTFE designs
- Contamination in the inactive area and organic residues on the measuring electrode are negligible
- Designs for extreme process conditions with temperatures of up to max. 400°C and vacuum
- The quick measurement, 50 ms, guarantees reliable detection
horizontal
Flüssigkeit
Documentation
: Limit value probes for organic and aqueous foams
With our impedance measuring principle and the high definition measuring electronics MTI all foams can be captured either analog as filling level tendency or digitally as limit value. A wide selection of probes enables all types of installation. The three-dimensional measuring behaviour enables a simple detection of foams. With the product specific probe in combination with the dynamic limit value detection different foams can be detected even if the probe is soiled. The control unit mipromex Typ MLS is equipped with a graphic display for the vsualization of the foam level and setting of the limit value.
.
PDF download
Tech Docs: Limit value bar probe type STL TC1
Tech Docs: Limit value bar probe type STMv KU3
Tech Docs: Limit Switch valuation unit type MLS
accordion
20
default
default
Betriebsorte
Geeignet für folgende Betriebsorte:
no-repeat;center top;;
auto
no-repeat;center top;;
auto
no-repeat;center top;;
auto
no-repeat;center top;;
auto
20
default
default
Sparten
Geeignet für folgende Sparten:
no-repeat;center top;;
auto
no-repeat;center top;;
auto
no-repeat;center top;;
auto
no-repeat;center top;;
auto
no-repeat;center top;;
auto
20
default
default
Branchen
Suitable for the following industries:
no-repeat;center top;;
auto
chemistry
petrochemistry
biochemistry
biodiesel
biotechnology
pharmaceuticals
no-repeat;center top;;
auto
surfactants
laquers & paint
animal feed
cosmetics
plant engineering
no-repeat;center top;;
auto
planning & engineering services
environment & energy
R & D
plastics technology
service providers
no-repeat;center top;;
auto
paper & forestry products
construction material
distributors
petroleum tank farms
private households
no-repeat;center top;;
auto
wholesalers
tank inspectors
petrol stations
surge tanks
communities
no-repeat;center top;;
auto
- Der Grenzwertschalter überwacht den statischen und/oder dynamischen Grenzwert für Schaum und Flüssigkeiten. Universell einsetzbar, für sichere Detektion und einfache Inbetriebnahme. Eine zuverlässige Messung aller Produkte wird durch das Impedanzmessprinzip garantiert.
mipromex® – der Grenzwertschalter
MLS 1* Niveau-Auswertegerät
Überwacht, detektiert und regelt die Antischaumzufuhr - Trennschichtmessung mit nicht mischbarer Flüssigkeiten, Mulmschichten, Phasenumkehr oder leitfähigen organische Phasen kann sehr problematisch sein – seien sie bei einer Extraktion oder nach einem chemischen Prozess entstanden. Starke Verschmutzung, kleinste Dichteunterschiede oder auch Emulsionsschichten können dazu führen, dass automatische Prozessabläufe durch eine zeitraubende Handabtrennung unterbrochen werden müssen.
- Vollautomatische Phasenabtrennung in Mono- oder Mehrzweckanlagen ohne Inbetriebnahme, spart Kosten und Zeit. Die plug & processing Trennschichtmessung mit nicht mischbaren Flüssigkeiten wird mit Rohrsonden TSS80 nach dem Auslassventil eingesetzt.
Emulsionsschichten, Phasenumkehr oder leitfähige organische Phasen, starke Verschmutzung oder kleinste Dichteunterschiede können mit der dynamischen Messwertüberwachung automatisch, schnell und zuverlässig erfasst und batchweise abgetrennt werden.
mipromex® – das Multitalent
MIQ 8* Trennschicht-Auswertegerät
Überwacht und detektiert die Trennschicht The full/empty detector monitors all your powders statically or dynamically. Spatial measuring behaviour guarantees reliable measuring of all products.
mipromex® – the safety switch
The limit value evaluation unit monitors and provides alerts- In der Petrochemie, insbesondere bei Lagertanks, ist das Potential zur Senkung der Betriebskosten voll auszuschöpfen. Bei der Tankentwässerung sollte mit der Rohrsonde TSS90, um Verluste zu verhindern, der Automatisierungsgrad hoch gehalten werden.
mipromex® – der Detektor
MAT 4* Analog-Auswertegerät
Für den harten Einsatz in der Petrochemie mit Rohrsonde TSS90 Level instrumentation for laboratories and mini-plant facilities at the highest level. Solutions for extreme process conditions with aquasant® measuring technology.
mipromex® – the specialist level evaluation unit for system-specific use
When this level meter is used, it stands out due to its versatile and simple commissioning.
